Feuling 8080

These kits allow engine builders to install or replace the hydraulic cam chain tensioners on stock 07-17 Twin Cams (including 06 Dyna), 99-06 Feuling camchest kits using conversion cams or conversion camplates. Will also work with a combination of factory, SE, Delkron or S&S oiling systems.

For use as stock replacements on 07-17 Twincam (Including 06 dyna). Also works with conversion camshafts when updating 01-06 Delphi ignition system & carbureted engines w/o cam position sensor to the hydraulic cam chain tensioner system. Requires an 07-17 style oiling system – See FEULING oiling systems
Kits

#8080 & #8083 are designed to work with:
FEULING conversion camchest kits: FEULING # 7220, 7220P, 7224, 7224P, 7221, 7221P, 7222, 7222P, 7225, 7225P, 7225ST, 7223, 7223P, 7223ST (Drag # 0925-1289, 0925-1393, 0925-1293, 0925-1399, 0925-1290, 0925-1394, 0925-1291, 0925-1395, 0925-1396, 0925-1294, 0925-1400, 0925-1401, 0925-1292, 0925-1397, 0925-1398)
FEULING conversion camshafts: Feuling #1015, 1016, 1017, 1018, 1019 (Drag #s: 0925-0671, 0925-0606, 0925-0607, 0925-0608, 0925-0672)
FEULING oiling systems: OE+ #7084, HP+ #7074, RS #7075 (Drag # 0932-0093, 0932-0029, 0932-0030).

Feuling Part # 8080 Includes the following FEULING components
1 -# 8061 Outer chain (HD #25675-06)
1 -# 8060 Inner chain (HD #25683-06)
1 -# 1091 Outer crank sprocket 17 tooth (HD #25673-06)
1- # 1092 Outer cam sprocket 34 tooth (HD #25728-06)
1 -# 8075 Outer hydraulic tensioner unit (HD #39968-06)
1 -# 8076 Inner hydraulic tensioner unit (HD #39969-06)
1 -# 8041 Spacer Kit Includes the following spacers
1-Thrust washer – front cam .100 (HD #-# 25729-06)
1- Spacer (.110 for cam alignment; use as required) (HD #25731-06)
1 -Spacer (.120 for cam alignment; use as required) (HD #25734-06)
1 -Spacer (.130 for cam alignment; use as required) (HD #25736-06)
1 -Spacer (.140 for cam alignment; use as required) (HD #25737-06)
1 -Spacer (.150 for cam alignment; use as required) (HD #25738-06)

FITS:

For use as stock replacements on 07-17 Twincam (Including 06 dyna). Also works with conversion camshafts when updating 01-06 Delphi ignition system & carbureted engines w/o cam position sensor to the hydraulic cam chain tensioner system. Requires an 07-17 style oiling system – See FEULING oiling systems

COUNTRY OF ORIGIN:

USA

KIT SKU’S:

1091, 1092, 8041, 8060, 8061, 8077

Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

FITMENT DISCLAIMER

Fitment information is provided as a general reference only and is not guaranteed for any motorcycle, whether stock or modified. Compatibility may vary by year, model, and individual configuration.

Customers are responsible for verifying fitment prior to purchase. House of Harley-Davidson assumes no liability for purchases made based on incorrect or unverified fitment information.

Please contact our Parts Department with any questions before ordering at 414-282-2211